Valves
Cryo Valves
Kits
Speakers
Pedals
Amp Parts
Cabinets
Accessories
MOD Reverb Tanks / MOD-4EB2C1B Reverb Tank
Click on image(s) above to view larger
The MOD Reverb Tanks are a range of high quality upgrade units made to vintage Accutronics specification.
MOD tanks differ from other reverb tanks by the fact that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. Made just like the original Hammond Accutronics tanks from the 1960s. They offer very close attention to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone. These are considered to the best sounding units on the market.
Mod Reverb Tank for 4EB2C1BSpecifications:
Solid, Sturdy Construction
Long (16 3/4 ") 2 Spring Unit, Medium Decay (1.75-3.0 seconds)
Input Impedance 600 Ohms, Output Impedance 2250 Ohms
Connectors: Input Insulated/Output Grounded
Mounting: Horizontal/Open side down
4EB2C1B is the reverb tank that was used in Peavey Bravo 112, Encore 65, Classic 30, Backstage 30, Valveking 100, Windsor Studio (Replaces Peavey part number 71011114) ) It is also a suitable upgrade/ replacement for the Vox AC30CC series amp.
The MOD Reverb Tanks are high-quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition, very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
Tweet