Valves
Cryo Valves
Kits
Speakers
Pedals
Amp Parts
Cabinets
Accessories
MOD Reverb Tanks / MOD-4BB3C1D Reverb Tank
Click on image(s) above to view larger
The MOD Reverb Tanks are a range of high quality upgrade units made to vintage Accutronics specification.
MOD tanks differ from other reverb tanks by the fact that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. Made just like the original Hammond Accutronics tanks from the 1960s. They offer very close attention to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone. These are considered to the best sounding units on the market.
Mod Reverb Tank for 4BB3C1DSpecifications:
Solid, Sturdy Construction
Long(16 3/4 ") 2 Spring Unit, Long Decay (2.75-4.0 seconds)
Input Impedance 150 Ohms, Output Impedance 2250 Ohms
Connectors: Input Insulated/Output Grounded
Mounting: Vertical/Connectors
4BB3C1D is the reverb tank that was used in the Marshall DSL60, TSL60, DSL100, TSL100, DSL201, DSL401, TSL122.
The MOD Reverb Tanks are high-quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition, very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
Tweet