MOD Reverb Tanks / MOD-9AB3C1B Reverb Tank
BACK
All prices contained on this page are exclusive of VAT. This is currently charged at 20% and is payable by the UK only.
Specifications:
Solid, Sturdy Construction
Long ((16 3/4 ") 3 Spring Unit, Long Decay (2.75-4.0 seconds)
Input Impedance 10 Ohms, Output Impedance 2575 Ohms
Connectors: Input Insulated/Output Grounded
Mounting: Horizontal/ Open Side Down
9AB3C1B is the reverb tank that is used in certain models of Fender, Hughes & Kettner, Marshall, Ampeg, Crate and Mesa Boogie.
The MOD Reverb Tanks are high-quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition, very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
All prices contained on this page are exclusive of VAT. This is currently charged at 20% and is payable by the UK only.
The MOD Reverb Tanks are a range of high quality upgrade units made to vintage Accutronics specification.
MOD tanks differ from other reverb tanks by the fact that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. Made just like the original Hammond Accutronics tanks from the 1960s. They offer very close attention to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone. These are considered to the best sounding units on the market.
Mod Reverb Tank for 9AB3C1BSpecifications:
Solid, Sturdy Construction
Long ((16 3/4 ") 3 Spring Unit, Long Decay (2.75-4.0 seconds)
Input Impedance 10 Ohms, Output Impedance 2575 Ohms
Connectors: Input Insulated/Output Grounded
Mounting: Horizontal/ Open Side Down
9AB3C1B is the reverb tank that is used in certain models of Fender, Hughes & Kettner, Marshall, Ampeg, Crate and Mesa Boogie.
The MOD Reverb Tanks are high-quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition, very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
Comments
Specials
-
5U4GB-NATIONAL
These National 5U4GB are a very high specification military grade 5U4GB made in the U.S.A.These rectifiers have a ...
£28.00£24.00 -
Earthquaker Plumes Overdrive Pedal
I love Tubescreamers and I simply Love the Earthquaker Plumes Overdrive Pedal.The Plumes works superbly when going into ...
£88.00£85.00 -
Way Huge Red Llama 25th Ann + Peterson Strobostomp HD Pedal Tuner
Pedal +Tuner Package
The Way Huge Red Llama is one of the most popular vintage drive pedals that was sadly ...
£245.00£232.75 -
MXR Custom Shop Timmy Mini Overdrive Pedal CSP207
The MXR Timmy Overdrive provides a huge range of gritty, textured tones that enhance your rig’s sound while preserving ...
£115.83£110.00 - Fulltone OCD GE Germ£
187.50£180.00 - Celestion G12H 55 Hz£
107.50£96.75 - Celestion G12H 55 Hz£
107.50£96.75
Tweet