Fender Pre Amp Kits / Fender Hot Rod Deville Low Gain 55 Harma 12AY7 STR Pre Amp Upgrade Kit

Fender Hot Rod Deville Low Gain 55 Harma 12AY7 STR Pre Amp Upgrade Kit Fender Hot Rod Deville Low Gain 55 Harma 12AY7 STR Pre Amp Upgrade Kit Click on image(s) above to view larger
£56.00

BACK
All prices contained on this page are exclusive of VAT. This is currently charged at 20% and is payable by the UK only.

These Pre amp revalve kits use specially chosen valves to help you attain the sound that you are looking for from your amplifier. The valves have been specially chosen for their sound characteristic. They are specially position matched as to their function in your amplifier. They are selected for gain, triode balance, low noise and microphonics. These kits are backed by over 25 years of experience in selecting pre amp valves for professional musicians who trust their sound to Watford valves.
Gain reduction 55%


The Fender Hot Rod Deville Harma low gain 55 12AY7 STR kit is designed to give you the cleanest sound out of your Fender amplifier. The 12AY7 was used by Fender as a low gain first stage signal valve in many of its early designs.

By putting this valve the V1 first gain position you will lower the gain of a pre amp circuit by around 55%. This low gain results in the maximum clean headroom for your amplifier. If you are playing humbuckers through a Fender amp, using a 12AY7 6072A is also a great way to achieve the maximum clean tone and the cleanest tone overall.

This valve is also very popular with Harmonica players as the low gain prevents the feedback that many harp players have problems with. This valve produces a warm rounded clean sound with low gain which will give the maximum clean tone and tame the harshest of pre amps.

The kit consists of 3 valves

1 Specially Selected Harma 12AY7 STR for position V1
1 Specially Selected Harma ECC83 STR for V2
1 Specially Selected & Balanced Harma ECC83 STR for V3

The Harma valves are specially selected for this kit using very tight gain parameters and
gain selection of the triode sections. The valves are carefully selected for low noise and low levels of hiss and ambient noise with a signal to noise ratio better than -80dBV.

Comments



NEWSLETTER SIGN UP

FOLLOW US
Facebook Twitter Follow us on Instagram